Fingerprint Time Attendance Machine records time attendance by identifying fingerprints. Compared with proximity card time attendance machine, its most advantage is to avoid pinch card, needn’t buy the card. Now, fingerprint recognition technology has been relatively stable, the use range is widely. Below are the proper use ways of Fingerprint Time Attendance machine:

Before pressing your finger, notice your finger is clean, without any dirt or possible chemical corrosion on it, ensure the one time successful rate of Fingerprint Time Attendance.

Fingerprint Time Attendance machine will not work for the dry or too cold finger, try again after your handling about these.

Place the registered finger on the brush fingerprint board flatly, voice prompt ”Thank You” means operating successfully. If not, you should put your finger again, or use your backup fingerprint brush.

Brush fingerprint to touch the fingerprint sensor board as large as possible, without Raising, Scraping, Sliding, Shake, Pulling the mirror or other activities.

When brush your fingerprint, if the time attendance machine cannot recognize the fingerprint or cannot work normally, please inform the Human Resources Department of taking the remedial measures, otherwise you will be deemed for not attendance.

When your normal use fingerprints or backup fingerprints don’t work well for different reasons, please come to the Human Resources Department to re-register your fingerprints. 

The staff whose fingers peel seriously, or the ten fingers cannot be captured accurately, can come to the Human Resources Department to be audited to get the personal password, and it can time attendance by the personal password till his fingerprint is available.Please don’t press the keypad of the time attendancemachine randomly, after pressing the fingerprint successfully, please don’t repeat or indiscriminately brush your fingerprint.